2008 Ford F-150 Engine Control Modules
Save up to 40% on original replacement 2008 Ford F-150 Engine Control Modules. Navigate our online catalogue to find Engine Control Modules and other parts designed specifically to fit a 2008 Ford F-150.
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Drive Type: RWD; Engine Base: 4.6L 281ci V8 (3.55x3.54; 90.2x90.0);
Drive Type: RWD; Engine Base: 4.6L 281ci V8 (3.55x3.54; 90.2x90.0);
Vehicle Fitment Notes:
All Calibrations with Module ID MN2-L37AA with Federal Emissions System Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues PATS Module Requires Programming after ECM Install. Correct VIN and OE Number required when ordering
All Calibrations with Module ID MN2-L37AA with Federal Emissions System Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues PATS Module Requires Programming after ECM Install. Correct VIN and OE Number required when ordering
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Drive Type: RWD; Engine Base: 4.6L 281ci V8 (3.55x3.54; 90.2x90.0);
Drive Type: RWD; Engine Base: 4.6L 281ci V8 (3.55x3.54; 90.2x90.0);
Vehicle Fitment Notes:
with Federal Emissions System PATS Module Requires Programming after ECM Install. Correct VIN and OE Number required when ordering All Calibrations with Module ID MN2-L37AA Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues
with Federal Emissions System PATS Module Requires Programming after ECM Install. Correct VIN and OE Number required when ordering All Calibrations with Module ID MN2-L37AA Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Drive Type: RWD; Engine Base: 4.6L 281ci V8 (3.55x3.54; 90.2x90.0);
Drive Type: RWD; Engine Base: 4.6L 281ci V8 (3.55x3.54; 90.2x90.0);
Vehicle Fitment Notes:
All Calibrations with Module ID MN2-L37AB with California Emissions System Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues PATS Module Requires Programming after ECM Install. Correct VIN and OE Number required when ordering
All Calibrations with Module ID MN2-L37AB with California Emissions System Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues PATS Module Requires Programming after ECM Install. Correct VIN and OE Number required when ordering
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Drive Type: RWD; Engine Base: 4.6L 281ci V8 (3.55x3.54; 90.2x90.0);
Drive Type: RWD; Engine Base: 4.6L 281ci V8 (3.55x3.54; 90.2x90.0);
Vehicle Fitment Notes:
with California Emissions System PATS Module Requires Programming after ECM Install. Correct VIN and OE Number required when ordering All Calibrations with Module ID MN2-L37AB Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues
with California Emissions System PATS Module Requires Programming after ECM Install. Correct VIN and OE Number required when ordering All Calibrations with Module ID MN2-L37AB Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Drive Type: 4WD; Engine Base: 4.6L 281ci V8 (3.55x3.54; 90.2x90.0);
Drive Type: 4WD; Engine Base: 4.6L 281ci V8 (3.55x3.54; 90.2x90.0);
Vehicle Fitment Notes:
All Calibrations with Module ID MN2-L37BA with Electronic Shift Transfer Case with Federal Emissions System Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues PATS Module Requires Programming after ECM Install. Correct VIN and OE Number required when ordering
All Calibrations with Module ID MN2-L37BA with Electronic Shift Transfer Case with Federal Emissions System Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues PATS Module Requires Programming after ECM Install. Correct VIN and OE Number required when ordering
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Drive Type: 4WD; Engine Base: 4.6L 281ci V8 (3.55x3.54; 90.2x90.0);
Drive Type: 4WD; Engine Base: 4.6L 281ci V8 (3.55x3.54; 90.2x90.0);
Vehicle Fitment Notes:
with Electronic Shift Transfer Case with Federal Emissions System PATS Module Requires Programming after ECM Install. Correct VIN and OE Number required when ordering All Calibrations with Module ID MN2-L37BA Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues
with Electronic Shift Transfer Case with Federal Emissions System PATS Module Requires Programming after ECM Install. Correct VIN and OE Number required when ordering All Calibrations with Module ID MN2-L37BA Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Drive Type: 4WD; Engine Base: 4.6L 281ci V8 (3.55x3.54; 90.2x90.0);
Drive Type: 4WD; Engine Base: 4.6L 281ci V8 (3.55x3.54; 90.2x90.0);
Vehicle Fitment Notes:
All Calibrations with Module ID MN2-L37BB with Electronic Shift Transfer Case with California Emissions System Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues PATS Module Requires Programming after ECM Install. Correct VIN and OE Number required when ordering
All Calibrations with Module ID MN2-L37BB with Electronic Shift Transfer Case with California Emissions System Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues PATS Module Requires Programming after ECM Install. Correct VIN and OE Number required when ordering
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Drive Type: 4WD; Engine Base: 4.6L 281ci V8 (3.55x3.54; 90.2x90.0);
Drive Type: 4WD; Engine Base: 4.6L 281ci V8 (3.55x3.54; 90.2x90.0);
Vehicle Fitment Notes:
with Electronic Shift Transfer Case with California Emissions System PATS Module Requires Programming after ECM Install. Correct VIN and OE Number required when ordering All Calibrations with Module ID MN2-L37BB Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues
with Electronic Shift Transfer Case with California Emissions System PATS Module Requires Programming after ECM Install. Correct VIN and OE Number required when ordering All Calibrations with Module ID MN2-L37BB Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Drive Type: 4WD; Engine Base: 4.6L 281ci V8 (3.55x3.54; 90.2x90.0);
Drive Type: 4WD; Engine Base: 4.6L 281ci V8 (3.55x3.54; 90.2x90.0);
Vehicle Fitment Notes:
All Calibrations with Module ID MN2-L37CA with Manual Shift Transfer Case with Federal Emissions System Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues PATS Module Requires Programming after ECM Install. Correct VIN and OE Number required when ordering
All Calibrations with Module ID MN2-L37CA with Manual Shift Transfer Case with Federal Emissions System Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues PATS Module Requires Programming after ECM Install. Correct VIN and OE Number required when ordering
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Drive Type: 4WD; Engine Base: 4.6L 281ci V8 (3.55x3.54; 90.2x90.0);
Drive Type: 4WD; Engine Base: 4.6L 281ci V8 (3.55x3.54; 90.2x90.0);
Vehicle Fitment Notes:
with Manual Shift Transfer Case with Federal Emissions System PATS Module Requires Programming after ECM Install. Correct VIN and OE Number required when ordering All Calibrations with Module ID MN2-L37CA Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues
with Manual Shift Transfer Case with Federal Emissions System PATS Module Requires Programming after ECM Install. Correct VIN and OE Number required when ordering All Calibrations with Module ID MN2-L37CA Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Drive Type: 4WD; Engine Base: 4.6L 281ci V8 (3.55x3.54; 90.2x90.0);
Drive Type: 4WD; Engine Base: 4.6L 281ci V8 (3.55x3.54; 90.2x90.0);
Vehicle Fitment Notes:
All Calibrations with Module ID MN2-L37CB with Manual Shift Transfer Case with California Emissions System Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues PATS Module Requires Programming after ECM Install. Correct VIN and OE Number required when ordering
All Calibrations with Module ID MN2-L37CB with Manual Shift Transfer Case with California Emissions System Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues PATS Module Requires Programming after ECM Install. Correct VIN and OE Number required when ordering
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Drive Type: 4WD; Engine Base: 4.6L 281ci V8 (3.55x3.54; 90.2x90.0);
Drive Type: 4WD; Engine Base: 4.6L 281ci V8 (3.55x3.54; 90.2x90.0);
Vehicle Fitment Notes:
with Manual Shift Transfer Case with California Emissions System PATS Module Requires Programming after ECM Install. Correct VIN and OE Number required when ordering All Calibrations with Module ID MN2-L37CB Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues
with Manual Shift Transfer Case with California Emissions System PATS Module Requires Programming after ECM Install. Correct VIN and OE Number required when ordering All Calibrations with Module ID MN2-L37CB Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 4.2L 256ci V6 (3.81x3.74; 96.8x95.0);
Engine Base: 4.2L 256ci V6 (3.81x3.74; 96.8x95.0);
Vehicle Fitment Notes:
All Calibrations with Module ID MN2-L37DA with Federal Emissions System Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues PATS Module Requires Programming after ECM Install. Correct VIN and OE Number required when ordering
All Calibrations with Module ID MN2-L37DA with Federal Emissions System Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues PATS Module Requires Programming after ECM Install. Correct VIN and OE Number required when ordering
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 4.2L 256ci V6 (3.81x3.74; 96.8x95.0);
Engine Base: 4.2L 256ci V6 (3.81x3.74; 96.8x95.0);
Vehicle Fitment Notes:
with Federal Emissions System PATS Module Requires Programming after ECM Install. Correct VIN and OE Number required when ordering All Calibrations with Module ID MN2-L37DA Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues
with Federal Emissions System PATS Module Requires Programming after ECM Install. Correct VIN and OE Number required when ordering All Calibrations with Module ID MN2-L37DA Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 4.2L 256ci V6 (3.81x3.74; 96.8x95.0);
Engine Base: 4.2L 256ci V6 (3.81x3.74; 96.8x95.0);
Vehicle Fitment Notes:
All Calibrations with Module ID MN2-L37DB with California Emissions System Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues PATS Module Requires Programming after ECM Install. Correct VIN and OE Number required when ordering
All Calibrations with Module ID MN2-L37DB with California Emissions System Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues PATS Module Requires Programming after ECM Install. Correct VIN and OE Number required when ordering
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 4.2L 256ci V6 (3.81x3.74; 96.8x95.0);
Engine Base: 4.2L 256ci V6 (3.81x3.74; 96.8x95.0);
Vehicle Fitment Notes:
with California Emissions System PATS Module Requires Programming after ECM Install. Correct VIN and OE Number required when ordering All Calibrations with Module ID MN2-L37DB Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues
with California Emissions System PATS Module Requires Programming after ECM Install. Correct VIN and OE Number required when ordering All Calibrations with Module ID MN2-L37DB Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 4.2L 256ci V6 (3.81x3.74; 96.8x95.0);
Engine Base: 4.2L 256ci V6 (3.81x3.74; 96.8x95.0);
Vehicle Fitment Notes:
All Calibrations with Module ID MN2-L37EA with Federal Emissions System Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues PATS Module Requires Programming after ECM Install. Correct VIN and OE Number required when ordering
All Calibrations with Module ID MN2-L37EA with Federal Emissions System Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues PATS Module Requires Programming after ECM Install. Correct VIN and OE Number required when ordering
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 4.2L 256ci V6 (3.81x3.74; 96.8x95.0);
Engine Base: 4.2L 256ci V6 (3.81x3.74; 96.8x95.0);
Vehicle Fitment Notes:
with Federal Emissions System PATS Module Requires Programming after ECM Install. Correct VIN and OE Number required when ordering All Calibrations with Module ID MN2-L37EA Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues
with Federal Emissions System PATS Module Requires Programming after ECM Install. Correct VIN and OE Number required when ordering All Calibrations with Module ID MN2-L37EA Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 4.2L 256ci V6 (3.81x3.74; 96.8x95.0);
Engine Base: 4.2L 256ci V6 (3.81x3.74; 96.8x95.0);
Vehicle Fitment Notes:
All Calibrations with Module ID MN2-L37EB with California Emissions System Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues PATS Module Requires Programming after ECM Install. Correct VIN and OE Number required when ordering
All Calibrations with Module ID MN2-L37EB with California Emissions System Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues PATS Module Requires Programming after ECM Install. Correct VIN and OE Number required when ordering
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 4.2L 256ci V6 (3.81x3.74; 96.8x95.0);
Engine Base: 4.2L 256ci V6 (3.81x3.74; 96.8x95.0);
Vehicle Fitment Notes:
with California Emissions System PATS Module Requires Programming after ECM Install. Correct VIN and OE Number required when ordering All Calibrations with Module ID MN2-L37EB Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues
with California Emissions System PATS Module Requires Programming after ECM Install. Correct VIN and OE Number required when ordering All Calibrations with Module ID MN2-L37EB Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Drive Type: 4WD; Engine Base: 5.4L 330ci V8 (3.55x4.17; 90.2x105.7);
Drive Type: 4WD; Engine Base: 5.4L 330ci V8 (3.55x4.17; 90.2x105.7);
Vehicle Fitment Notes:
All Calibrations with Module ID MN2-L37XA with Federal Emissions System with Electronic Shift Transfer Case Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues PATS Module Requires Programming after ECM Install. Correct VIN and OE Number required when ordering
All Calibrations with Module ID MN2-L37XA with Federal Emissions System with Electronic Shift Transfer Case Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues PATS Module Requires Programming after ECM Install. Correct VIN and OE Number required when ordering
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Drive Type: 4WD; Engine Base: 5.4L 330ci V8 (3.55x4.17; 90.2x105.7);
Drive Type: 4WD; Engine Base: 5.4L 330ci V8 (3.55x4.17; 90.2x105.7);
Vehicle Fitment Notes:
with Electronic Shift Transfer Case with Federal Emissions System PATS Module Requires Programming after ECM Install. Correct VIN and OE Number required when ordering All Calibrations with Module ID MN2-L37XA Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues
with Electronic Shift Transfer Case with Federal Emissions System PATS Module Requires Programming after ECM Install. Correct VIN and OE Number required when ordering All Calibrations with Module ID MN2-L37XA Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Drive Type: 4WD; Engine Base: 5.4L 330ci V8 (3.55x4.17; 90.2x105.7);
Drive Type: 4WD; Engine Base: 5.4L 330ci V8 (3.55x4.17; 90.2x105.7);
Vehicle Fitment Notes:
All Calibrations with Module ID MN2-L37YA with Federal Emissions System with Manual Shift Transfer Case Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues PATS Module Requires Programming after ECM Install. Correct VIN and OE Number required when ordering
All Calibrations with Module ID MN2-L37YA with Federal Emissions System with Manual Shift Transfer Case Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues PATS Module Requires Programming after ECM Install. Correct VIN and OE Number required when ordering
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Drive Type: 4WD; Engine Base: 5.4L 330ci V8 (3.55x4.17; 90.2x105.7);
Drive Type: 4WD; Engine Base: 5.4L 330ci V8 (3.55x4.17; 90.2x105.7);
Vehicle Fitment Notes:
with Manual Shift Transfer Case with Federal Emissions System PATS Module Requires Programming after ECM Install. Correct VIN and OE Number required when ordering All Calibrations with Module ID MN2-L37YA Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues
with Manual Shift Transfer Case with Federal Emissions System PATS Module Requires Programming after ECM Install. Correct VIN and OE Number required when ordering All Calibrations with Module ID MN2-L37YA Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Drive Type: RWD; Engine Base: 5.4L 330ci V8 (3.55x4.17; 90.2x105.7);
Drive Type: RWD; Engine Base: 5.4L 330ci V8 (3.55x4.17; 90.2x105.7);
Vehicle Fitment Notes:
All Calibrations with Module ID MN2-L37WA Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues PATS Module Requires Programming after ECM Install. Correct VIN and OE Number required when ordering
All Calibrations with Module ID MN2-L37WA Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues PATS Module Requires Programming after ECM Install. Correct VIN and OE Number required when ordering
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Drive Type: RWD; Engine Base: 5.4L 330ci V8 (3.55x4.17; 90.2x105.7);
Drive Type: RWD; Engine Base: 5.4L 330ci V8 (3.55x4.17; 90.2x105.7);
Vehicle Fitment Notes:
PATS Module Requires Programming after ECM Install. Correct VIN and OE Number required when ordering All Calibrations with Module ID MN2-L37WA Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues
PATS Module Requires Programming after ECM Install. Correct VIN and OE Number required when ordering All Calibrations with Module ID MN2-L37WA Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Drive Type: RWD; Engine Base: 5.4L 330ci V8 (3.55x4.17; 90.2x105.7);
Drive Type: RWD; Engine Base: 5.4L 330ci V8 (3.55x4.17; 90.2x105.7);
Vehicle Fitment Notes:
All Calibrations with Module ID MN2-L37ZB Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues PATS Module Requires Programming after ECM Install. Correct VIN and OE Number required when ordering
All Calibrations with Module ID MN2-L37ZB Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues PATS Module Requires Programming after ECM Install. Correct VIN and OE Number required when ordering
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Drive Type: RWD; Engine Base: 5.4L 330ci V8 (3.55x4.17; 90.2x105.7);
Drive Type: RWD; Engine Base: 5.4L 330ci V8 (3.55x4.17; 90.2x105.7);
Vehicle Fitment Notes:
PATS Module Requires Programming after ECM Install. Correct VIN and OE Number required when ordering All Calibrations with Module ID MN2-L37ZB Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues
PATS Module Requires Programming after ECM Install. Correct VIN and OE Number required when ordering All Calibrations with Module ID MN2-L37ZB Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Drive Type: RWD; Engine Base: 5.4L 330ci V8 (3.55x4.17; 90.2x105.7);
Drive Type: RWD; Engine Base: 5.4L 330ci V8 (3.55x4.17; 90.2x105.7);
Vehicle Fitment Notes:
All Calibrations with Module ID MN2-L37ZA with Federal Emissions System Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues PATS Module Requires Programming after ECM Install. Correct VIN and OE Number required when ordering
All Calibrations with Module ID MN2-L37ZA with Federal Emissions System Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues PATS Module Requires Programming after ECM Install. Correct VIN and OE Number required when ordering
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Drive Type: RWD; Engine Base: 5.4L 330ci V8 (3.55x4.17; 90.2x105.7);
Drive Type: RWD; Engine Base: 5.4L 330ci V8 (3.55x4.17; 90.2x105.7);
Vehicle Fitment Notes:
with Federal Emissions System PATS Module Requires Programming after ECM Install. Correct VIN and OE Number required when ordering All Calibrations with Module ID MN2-L37ZA Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues
with Federal Emissions System PATS Module Requires Programming after ECM Install. Correct VIN and OE Number required when ordering All Calibrations with Module ID MN2-L37ZA Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Drive Type: RWD; Engine Base: 5.4L 330ci V8 (3.55x4.17; 90.2x105.7);
Drive Type: RWD; Engine Base: 5.4L 330ci V8 (3.55x4.17; 90.2x105.7);
Vehicle Fitment Notes:
All Calibrations with Module ID MN2-L37WB Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues PATS Module Requires Programming after ECM Install. Correct VIN and OE Number required when ordering
All Calibrations with Module ID MN2-L37WB Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues PATS Module Requires Programming after ECM Install. Correct VIN and OE Number required when ordering
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Drive Type: RWD; Engine Base: 5.4L 330ci V8 (3.55x4.17; 90.2x105.7);
Drive Type: RWD; Engine Base: 5.4L 330ci V8 (3.55x4.17; 90.2x105.7);
Vehicle Fitment Notes:
PATS Module Requires Programming after ECM Install. Correct VIN and OE Number required when ordering All Calibrations with Module ID MN2-L37WB Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues
PATS Module Requires Programming after ECM Install. Correct VIN and OE Number required when ordering All Calibrations with Module ID MN2-L37WB Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Drive Type: 4WD; Engine Base: 5.4L 330ci V8 (3.55x4.17; 90.2x105.7);
Drive Type: 4WD; Engine Base: 5.4L 330ci V8 (3.55x4.17; 90.2x105.7);
Vehicle Fitment Notes:
All Calibrations with Module ID MN2-L37XB with Electronic Shift Transfer Case Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues PATS Module Requires Programming after ECM Install. Correct VIN and OE Number required when ordering
All Calibrations with Module ID MN2-L37XB with Electronic Shift Transfer Case Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues PATS Module Requires Programming after ECM Install. Correct VIN and OE Number required when ordering
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Drive Type: 4WD; Engine Base: 5.4L 330ci V8 (3.55x4.17; 90.2x105.7);
Drive Type: 4WD; Engine Base: 5.4L 330ci V8 (3.55x4.17; 90.2x105.7);
Vehicle Fitment Notes:
with Electronic Shift Transfer Case PATS Module Requires Programming after ECM Install. Correct VIN and OE Number required when ordering All Calibrations with Module ID MN2-L37XB Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues
with Electronic Shift Transfer Case PATS Module Requires Programming after ECM Install. Correct VIN and OE Number required when ordering All Calibrations with Module ID MN2-L37XB Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Drive Type: 4WD; Engine Base: 5.4L 330ci V8 (3.55x4.17; 90.2x105.7);
Drive Type: 4WD; Engine Base: 5.4L 330ci V8 (3.55x4.17; 90.2x105.7);
Vehicle Fitment Notes:
All Calibrations with Module ID MN2-L37YB with Manual Shift Transfer Case Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues PATS Module Requires Programming after ECM Install. Correct VIN and OE Number required when ordering
All Calibrations with Module ID MN2-L37YB with Manual Shift Transfer Case Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues PATS Module Requires Programming after ECM Install. Correct VIN and OE Number required when ordering
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Drive Type: 4WD; Engine Base: 5.4L 330ci V8 (3.55x4.17; 90.2x105.7);
Drive Type: 4WD; Engine Base: 5.4L 330ci V8 (3.55x4.17; 90.2x105.7);
Vehicle Fitment Notes:
with Manual Shift Transfer Case PATS Module Requires Programming after ECM Install. Correct VIN and OE Number required when ordering All Calibrations with Module ID MN2-L37YB Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues
with Manual Shift Transfer Case PATS Module Requires Programming after ECM Install. Correct VIN and OE Number required when ordering All Calibrations with Module ID MN2-L37YB Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues