1996 Ford Explorer Engine Control Modules
Save up to 40% on original replacement 1996 Ford Explorer Engine Control Modules. Navigate our online catalogue to find Engine Control Modules and other parts designed specifically to fit a 1996 Ford Explorer.
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 4.0L 245ci V6 (3.95x3.32; 100.3x84.3);
Engine Base: 4.0L 245ci V6 (3.95x3.32; 100.3x84.3);
Vehicle Fitment Notes:
This Unit is Pre-Programmed at the Factory with Calibration # 6-58B Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
This Unit is Pre-Programmed at the Factory with Calibration # 6-58B Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 4.0L 245ci V6 (3.95x3.32; 100.3x84.3);
Engine Base: 4.0L 245ci V6 (3.95x3.32; 100.3x84.3);
Vehicle Fitment Notes:
with Calibration # 6-58B Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
with Calibration # 6-58B Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 4.0L 245ci V6 (3.95x3.32; 100.3x84.3);
Engine Base: 4.0L 245ci V6 (3.95x3.32; 100.3x84.3);
Vehicle Fitment Notes:
This Unit is Pre-Programmed at the Factory with Calibration # 6-58R Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
This Unit is Pre-Programmed at the Factory with Calibration # 6-58R Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 4.0L 245ci V6 (3.95x3.32; 100.3x84.3);
Engine Base: 4.0L 245ci V6 (3.95x3.32; 100.3x84.3);
Vehicle Fitment Notes:
with Calibration # 6-58R Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
with Calibration # 6-58R Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 5.0L 302ci V8 (4.00x3.00; 101.6x76.2);
Engine Base: 5.0L 302ci V8 (4.00x3.00; 101.6x76.2);
Vehicle Fitment Notes:
This Unit is Pre-Programmed at the Factory with Calibration # 6-54G Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
This Unit is Pre-Programmed at the Factory with Calibration # 6-54G Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 5.0L 302ci V8 (4.00x3.00; 101.6x76.2);
Engine Base: 5.0L 302ci V8 (4.00x3.00; 101.6x76.2);
Vehicle Fitment Notes:
with Calibration # 6-54G Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
with Calibration # 6-54G Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 4.0L 245ci V6 (3.95x3.32; 100.3x84.3);
Engine Base: 4.0L 245ci V6 (3.95x3.32; 100.3x84.3);
Vehicle Fitment Notes:
All Calibrations with Module ID ML2-306 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Correct VIN and OE Number required when ordering
All Calibrations with Module ID ML2-306 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Correct VIN and OE Number required when ordering
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 4.0L 245ci V6 (3.95x3.32; 100.3x84.3);
Engine Base: 4.0L 245ci V6 (3.95x3.32; 100.3x84.3);
Vehicle Fitment Notes:
Correct VIN and OE Number required when ordering All Calibrations with Module ID ML2-306 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required
Correct VIN and OE Number required when ordering All Calibrations with Module ID ML2-306 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 4.0L 245ci V6 (3.95x3.32; 100.3x84.3);
Engine Base: 4.0L 245ci V6 (3.95x3.32; 100.3x84.3);
Vehicle Fitment Notes:
All Calibrations with Module ID ML2-308 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Correct VIN and OE Number required when ordering
All Calibrations with Module ID ML2-308 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Correct VIN and OE Number required when ordering
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 4.0L 245ci V6 (3.95x3.32; 100.3x84.3);
Engine Base: 4.0L 245ci V6 (3.95x3.32; 100.3x84.3);
Vehicle Fitment Notes:
Correct VIN and OE Number required when ordering All Calibrations with Module ID ML2-308 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required
Correct VIN and OE Number required when ordering All Calibrations with Module ID ML2-308 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required