1997 Ford Contour Engine Control Modules
Save up to 40% on original replacement 1997 Ford Contour Engine Control Modules. Navigate our online catalogue to find Engine Control Modules and other parts designed specifically to fit a 1997 Ford Contour.
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 2.0L 1989cc 121ci L4 (3.34x3.46; 84.8x88.0);
Engine Base: 2.0L 1989cc 121ci L4 (3.34x3.46; 84.8x88.0);
Vehicle Fitment Notes:
ID #(s) 97BB-AKB This Unit is Pre-Programmed at the Factory with Calibration # 7-03C Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
ID #(s) 97BB-AKB This Unit is Pre-Programmed at the Factory with Calibration # 7-03C Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 2.0L 1989cc 121ci L4 (3.34x3.46; 84.8x88.0);
Engine Base: 2.0L 1989cc 121ci L4 (3.34x3.46; 84.8x88.0);
Vehicle Fitment Notes:
with Calibration # 7-03C ID #(s) 97BB-AKB Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
with Calibration # 7-03C ID #(s) 97BB-AKB Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 2.0L 1989cc 121ci L4 (3.34x3.46; 84.8x88.0);
Engine Base: 2.0L 1989cc 121ci L4 (3.34x3.46; 84.8x88.0);
Vehicle Fitment Notes:
This Unit is Pre-Programmed at the Factory with Calibration # 7-03S Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
This Unit is Pre-Programmed at the Factory with Calibration # 7-03S Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 2.0L 1989cc 121ci L4 (3.34x3.46; 84.8x88.0);
Engine Base: 2.0L 1989cc 121ci L4 (3.34x3.46; 84.8x88.0);
Vehicle Fitment Notes:
with Calibration # 7-03S Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
with Calibration # 7-03S Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 2.0L 1989cc 121ci L4 (3.34x3.46; 84.8x88.0);
Engine Base: 2.0L 1989cc 121ci L4 (3.34x3.46; 84.8x88.0);
Vehicle Fitment Notes:
This Unit is Pre-Programmed at the Factory with Calibration # 7-04C Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
This Unit is Pre-Programmed at the Factory with Calibration # 7-04C Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 2.0L 1989cc 121ci L4 (3.34x3.46; 84.8x88.0);
Engine Base: 2.0L 1989cc 121ci L4 (3.34x3.46; 84.8x88.0);
Vehicle Fitment Notes:
with Calibration # 7-04C Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
with Calibration # 7-04C Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 2.0L 1989cc 121ci L4 (3.34x3.46; 84.8x88.0);
Engine Base: 2.0L 1989cc 121ci L4 (3.34x3.46; 84.8x88.0);
Vehicle Fitment Notes:
This Unit is Pre-Programmed at the Factory with Calibration # 7-04S Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
This Unit is Pre-Programmed at the Factory with Calibration # 7-04S Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 2.0L 1989cc 121ci L4 (3.34x3.46; 84.8x88.0);
Engine Base: 2.0L 1989cc 121ci L4 (3.34x3.46; 84.8x88.0);
Vehicle Fitment Notes:
with Calibration # 7-04S Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
with Calibration # 7-04S Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 2.5L 2450cc 155ci V6 (3.24x3.13; 82.3x79.5);
Engine Base: 2.5L 2450cc 155ci V6 (3.24x3.13; 82.3x79.5);
Vehicle Fitment Notes:
This Unit is Pre-Programmed at the Factory with Calibration # 7-11C Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
This Unit is Pre-Programmed at the Factory with Calibration # 7-11C Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 2.5L 2450cc 155ci V6 (3.24x3.13; 82.3x79.5);
Engine Base: 2.5L 2450cc 155ci V6 (3.24x3.13; 82.3x79.5);
Vehicle Fitment Notes:
with Calibration # 7-11C Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
with Calibration # 7-11C Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 2.5L 2450cc 155ci V6 (3.24x3.13; 82.3x79.5);
Engine Base: 2.5L 2450cc 155ci V6 (3.24x3.13; 82.3x79.5);
Vehicle Fitment Notes:
This Unit is Pre-Programmed at the Factory with Calibration # 7-11S Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
This Unit is Pre-Programmed at the Factory with Calibration # 7-11S Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 2.5L 2450cc 155ci V6 (3.24x3.13; 82.3x79.5);
Engine Base: 2.5L 2450cc 155ci V6 (3.24x3.13; 82.3x79.5);
Vehicle Fitment Notes:
with Calibration # 7-11S Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
with Calibration # 7-11S Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 2.5L 2450cc 155ci V6 (3.24x3.13; 82.3x79.5);
Engine Base: 2.5L 2450cc 155ci V6 (3.24x3.13; 82.3x79.5);
Vehicle Fitment Notes:
ID #(s) 97BB-ASA thru ASD This Unit is Pre-Programmed at the Factory with Calibration # 7-12C Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
ID #(s) 97BB-ASA thru ASD This Unit is Pre-Programmed at the Factory with Calibration # 7-12C Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 2.5L 2450cc 155ci V6 (3.24x3.13; 82.3x79.5);
Engine Base: 2.5L 2450cc 155ci V6 (3.24x3.13; 82.3x79.5);
Vehicle Fitment Notes:
with Calibration # 7-12C ID #(s) 97BB-ASA thru ASD Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
with Calibration # 7-12C ID #(s) 97BB-ASA thru ASD Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 2.5L 2450cc 155ci V6 (3.24x3.13; 82.3x79.5);
Engine Base: 2.5L 2450cc 155ci V6 (3.24x3.13; 82.3x79.5);
Vehicle Fitment Notes:
This Unit is Pre-Programmed at the Factory with Calibration # 7-12S Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
This Unit is Pre-Programmed at the Factory with Calibration # 7-12S Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 2.5L 2450cc 155ci V6 (3.24x3.13; 82.3x79.5);
Engine Base: 2.5L 2450cc 155ci V6 (3.24x3.13; 82.3x79.5);
Vehicle Fitment Notes:
with Calibration # 7-12S Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
with Calibration # 7-12S Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 2.5L 2450cc 155ci V6 (3.24x3.13; 82.3x79.5);
Engine Base: 2.5L 2450cc 155ci V6 (3.24x3.13; 82.3x79.5);
Vehicle Fitment Notes:
ID #(s) 97BB-AUA thru AUD This Unit is Pre-Programmed at the Factory with Calibration # 7-12C
ID #(s) 97BB-AUA thru AUD This Unit is Pre-Programmed at the Factory with Calibration # 7-12C
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 2.5L 2450cc 155ci V6 (3.24x3.13; 82.3x79.5);
Engine Base: 2.5L 2450cc 155ci V6 (3.24x3.13; 82.3x79.5);
Vehicle Fitment Notes:
with Calibration # 7-12C ID #(s) 97BB-AUA thru AUD This Unit is Pre-Programmed at the Factory
with Calibration # 7-12C ID #(s) 97BB-AUA thru AUD This Unit is Pre-Programmed at the Factory
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 2.0L 1989cc 121ci L4 (3.34x3.46; 84.8x88.0);
Engine Base: 2.0L 1989cc 121ci L4 (3.34x3.46; 84.8x88.0);
Vehicle Fitment Notes:
This Unit is Pre-Programmed at the Factory with Calibration # 7-04G Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
This Unit is Pre-Programmed at the Factory with Calibration # 7-04G Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 2.0L 1989cc 121ci L4 (3.34x3.46; 84.8x88.0);
Engine Base: 2.0L 1989cc 121ci L4 (3.34x3.46; 84.8x88.0);
Vehicle Fitment Notes:
with Calibration # 7-04G Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
with Calibration # 7-04G Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 2.0L 1989cc 121ci L4 (3.34x3.46; 84.8x88.0);
Engine Base: 2.0L 1989cc 121ci L4 (3.34x3.46; 84.8x88.0);
Vehicle Fitment Notes:
This Unit is Pre-Programmed at the Factory with Calibration # 7-04N Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
This Unit is Pre-Programmed at the Factory with Calibration # 7-04N Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 2.0L 1989cc 121ci L4 (3.34x3.46; 84.8x88.0);
Engine Base: 2.0L 1989cc 121ci L4 (3.34x3.46; 84.8x88.0);
Vehicle Fitment Notes:
with Calibration # 7-04N Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
with Calibration # 7-04N Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 2.0L 1989cc 121ci L4 (3.34x3.46; 84.8x88.0);
Engine Base: 2.0L 1989cc 121ci L4 (3.34x3.46; 84.8x88.0);
Vehicle Fitment Notes:
All Calibrations with Module ID ML2-316 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Correct VIN and OE Number required when ordering
All Calibrations with Module ID ML2-316 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Correct VIN and OE Number required when ordering
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 2.0L 1989cc 121ci L4 (3.34x3.46; 84.8x88.0);
Engine Base: 2.0L 1989cc 121ci L4 (3.34x3.46; 84.8x88.0);
Vehicle Fitment Notes:
Correct VIN and OE Number required when ordering All Calibrations with Module ID ML2-316 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required
Correct VIN and OE Number required when ordering All Calibrations with Module ID ML2-316 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 2.0L 1989cc 121ci L4 (3.34x3.46; 84.8x88.0);
Engine Base: 2.0L 1989cc 121ci L4 (3.34x3.46; 84.8x88.0);
Vehicle Fitment Notes:
All Calibrations with Module ID ML2-317 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Correct VIN and OE Number required when ordering
All Calibrations with Module ID ML2-317 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Correct VIN and OE Number required when ordering
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 2.0L 1989cc 121ci L4 (3.34x3.46; 84.8x88.0);
Engine Base: 2.0L 1989cc 121ci L4 (3.34x3.46; 84.8x88.0);
Vehicle Fitment Notes:
Correct VIN and OE Number required when ordering All Calibrations with Module ID ML2-317 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required
Correct VIN and OE Number required when ordering All Calibrations with Module ID ML2-317 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 2.5L 2450cc 155ci V6 (3.24x3.13; 82.3x79.5);
Engine Base: 2.5L 2450cc 155ci V6 (3.24x3.13; 82.3x79.5);
Vehicle Fitment Notes:
All Calibrations with Module ID ML2-321 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Correct VIN and OE Number required when ordering
All Calibrations with Module ID ML2-321 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Correct VIN and OE Number required when ordering
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 2.5L 2450cc 155ci V6 (3.24x3.13; 82.3x79.5);
Engine Base: 2.5L 2450cc 155ci V6 (3.24x3.13; 82.3x79.5);
Vehicle Fitment Notes:
Correct VIN and OE Number required when ordering All Calibrations with Module ID ML2-321 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required
Correct VIN and OE Number required when ordering All Calibrations with Module ID ML2-321 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 2.5L 2450cc 155ci V6 (3.24x3.13; 82.3x79.5);
Engine Base: 2.5L 2450cc 155ci V6 (3.24x3.13; 82.3x79.5);
Vehicle Fitment Notes:
All Calibrations with Module ID ML2-322 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Correct VIN and OE Number required when ordering
All Calibrations with Module ID ML2-322 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Correct VIN and OE Number required when ordering
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 2.5L 2450cc 155ci V6 (3.24x3.13; 82.3x79.5);
Engine Base: 2.5L 2450cc 155ci V6 (3.24x3.13; 82.3x79.5);
Vehicle Fitment Notes:
Correct VIN and OE Number required when ordering All Calibrations with Module ID ML2-322 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required
Correct VIN and OE Number required when ordering All Calibrations with Module ID ML2-322 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 2.5L 2450cc 155ci V6 (3.24x3.13; 82.3x79.5);
Engine Base: 2.5L 2450cc 155ci V6 (3.24x3.13; 82.3x79.5);
Vehicle Fitment Notes:
All Calibrations with Module ID MLP-422 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues Correct VIN and OE Number required when ordering
All Calibrations with Module ID MLP-422 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues Correct VIN and OE Number required when ordering
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 2.5L 2450cc 155ci V6 (3.24x3.13; 82.3x79.5);
Engine Base: 2.5L 2450cc 155ci V6 (3.24x3.13; 82.3x79.5);
Vehicle Fitment Notes:
Correct VIN and OE Number required when ordering All Calibrations with Module ID MLP-422 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues
Correct VIN and OE Number required when ordering All Calibrations with Module ID MLP-422 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues